Platsil Part H Hardener Gel 10 & 25 aggregates K3 and K5 will accommodate

K3 and K5 will accommodate small pattern work and tight areas

you can add 1 to 3 coats depending on the lever of “gloss” you want to create the more layers the higher the shine

Mix the 105 Resin and 207 Special Clear Hardener thoroughly in the pierced and taped mixing cup

The compound itself has low toxicity but decomposes on strong heating to evolve highly toxic fumes

Lessons focus on techniques specific to Cx5 and also explain the fundamentals of professional sculpting

Platsil Part H Hardener Gel 10 & 25 aggregates K3 and K5 will accommodateUse PlatSil Part H Hardener to increase the Shore hardness of any PlatSil Gel. It also increases working and demold time. For PlatSil Gel OO, a mix of 1A: 1B: 1H gives a Shore A~10 rubber. For PlatSil Gel 10, a 1A: 1B; 1H mix cures to a Shore A~20 rubber. For PlatSil Gel 25, a mix of 1A: 1B: 1H has 7 minute working time and cures to a Shore A~40 rubber in under two hours.